REMOVAL OF GROUT BLOCKS FROM A DIAPHRAGM WALL IN FRANCE
Le Havre, France
During the construction of a new harbour in Le Havre (France), grout blocks adhered to the diaphragm wall at a depth of 22 metres.
DUC came up with a creative solution to remove the blocks that was faster and safer than the original method.
The intention was to use a chain connected to two winches mounted above the work to ‘saw’ the blocks away from the wall. To do this, local divers had to cut grooves in the bottom of the blocks through which the cable could pass.
Using explosives to cut the grooves would have been very time consuming. Therefore, DUC Marine Group was asked if a quicker method was available. As the blocks were made of a fairly hard material, DUC suggested to use our 2500 Bar high-pressure water jet to cut the initial grooves for the cable that would be used to saw through the blocks.
However, the cable ‘saw’ continually broke and little progress was made.
DUC provided the solution of using the water jet to make a 100 x 100 x 10 cm opening between the diaphragm wall and the block from above. A 68-tonne air bag was then positioned in this opening that was then inflated to force the grout block from the wall.
This resulted in the safe removal of the 15 to 45-tonne blocks. The job was concluded to the satisfaction of the client, Dragage Atlantique, who were able to put quay into service on time.
All of the activities were carried out using company equipment, which included a 2500 UHP unit, air bags, a decompression chamber and a Nitrox unit.
Categories: Civil Underwater Construction, Inshore, Offshore, Projects
- MAURITANIAN IRON ORE JETTY Mauritania, Africa During a five-year project, DUC Marinegroup performed maintenance to an iron ore jetty in Mauritania, Africa. The jetty was protected […]
- REMOVAL OF GROUT BLOCKS FROM A DIAPHRAGM WALL IN FRANCE Le Havre, France During the construction of a new harbour in Le Havre (France), grout blocks […]
- M.E.T. Pile Encapsulation Port of Rotterdam, The Netherlands At the Maatschap Europoort Terminal (M.E.T.) in the 7th Petroleum harbour of Rotterdam, DUC Marinegroup together with Henskens B.V. […]
- CONSTRUCTION PARKING GARAGE MAHLER 4 For the construction parking garage mahler 4 in busy Amsterdam. we carried out underwater concreting at a depth of six metres. […]
- SHELL PARKING GARAGE The head office of SHELL is located right in the heart of The Hague. This area having little or no parking facilities, a […]
- INSPECT, TEST AND IF REQUIRED REPLACE ANODES Port of Rotterdam and Amsterdam, The Netherlands In the Port of Rotterdam and Amsterdam, DUC Marine Group regularly checks […]
- VOPAK PILE ENCAPSULATION Port of Rotterdam, Nederland At Vopak in the port of Rotterdam, DUC Marinegroup blasted and preserved steel piles in a five-year project by […]
- ENECOGEN ROTTERDAM Power Plant, Rotterdam DUC Marinegroup in cooperation with BAM installed two cooling water inlets for a power plant in Rotterdam. This was completed to […]
